The Nitecore Digicharger D2 has almost every function you will ever need when it comes to charging. Not only will it charge your batteries for your vape, But it will also charge AAA, AA and C models.
The charger is quite innovative. It is powered by two independent chips that control each respective slot. With this system, you will get an optimal charging session for the batteries. It automatically recognizes which model you want to charge, and sets the ideal power for that particular battery. And least but not last, the charger automatically cuts the current after a 20 hour charging session.
With the LED-light bars, you will see the process of each charge.
We mentioned the security systems earlier. Nitecore Digicharger D2 has the following protection built-in for your safety:
- If you reverse the polarity on the battery, the charger will blink and cut the charging.
- The charger measures the temperature and cuts the power if the batteries gets to hot.
- The charger cuts off the power after 20 hours straight charging.
DON’T LEAVE THE CHARGER UNATTENDED WHILE CHARGING! DO NOT CHARGE OVERNIGHT!
- Protection against reverse polarity.
- Automatic power off when charging is complete.
- Protection against over charging.
- The charger monitors temperature.
- LED indicators which tells the process.
- Batteries that do not work can be activated again with the smart chip.
- Mode for charging batteries with low current.
- Automatic protection against overcharging. After 20 hours, the charger cuts of.
- Automatic charge mode selection.
- Input: AC 100-240V 50/60Hz. DC 12V 1A
- Output voltage: 4.2V / 3.7V / 1.48V.
- Output current: 500mA x 2
- Compatible battery types:
- Ni-MH / Ni-Cd: AA, AAA, AAAA, C
- Dimensions: 132mm×70mm×35mm
- Weight: 156g (without batteries and power cord)
Li-ion / IMR / LiFePO4:
- (RCR123), 14500